4-2
Next page
Press button 2 times (Or the button
10 times) to select the strokes/pistons setting
screen.
CAUTION!
Press button to enter strokes/pistons
setting screen.
EX. Now the setting is 2-stroke with one single
piston.
Press button or to select the stroke.
There are 4-stroke and 2-stroke .
Now the
2
is flashing!
Press button to enter pistons setting
screen.
EX. The setting is changed from 2-Stroke to
4-stroke.
Cycle/ piston setting
Make sure the correct strokes and pistons before setting.
Make sure the input is correct, or the RPM output will be incorrect.
We define the engine with the ignition system ignites every 360 degree as 2-stroke
and the engine with the ignition system ignites every 720 degree as 4-stroke.
Some 4-stroke bikes with one single piston are igniting every 360 degree once, so
the setting should be the same as the bike with 2-stroke and one piston engine.
If you just want to check the setting, press
button to return to the main screen.
Press button or to select the number
you want to input.
2-stroke pistons are 1,2,3,4.
4-stroke pistons are 1,2,3,4,5,6,8,10,12.
Now the
1
is flashing!
Press button to enter the signal impulse
setting.
EX. The piston setting is changed from 1 P
(Piston) to 4 P (Pistons).
Press button to enter the digital needle
tachometer range setting
EX. The input signal is changed from low to hight.
Press button or to choose the signal
impulse you want to set.
Now the signal impulse setting is flashing!
If the tachometer can't detect the
signal (No RPM is displayed on the
screen), you could choose another
setting and check it again.
The signal impulse setting range is
between hight (The positive signal) &
low (The negative signal)
Next page
Cortesia de www.motomarcadores.com
Cortesia de www.motomarcadores.com
