background image

3-3

In main/digital screen, press button                 to select the function display between 
odometer, trip meter and clock. (Please refer to 

3-4 & 3-5

)

In setting screen, press button                 to select the screen you want to make the setting. 
(Please refer to 

3-6

)

In function setting screen, press button                 to 
select the units and decrease the setting value (Like the 
figure below) , press or hold down to decrease the 
setting value .

In main/digital screen, press button            to select the function display between water 
temperature, oil temperature, and the fuel . (Please refer to 

3-4 & 3-5

)

In setting screen, press button            to select the screen you want to make the setting. 
(Please refer to 

3-6

)

In function setting screen, press button            to select the units and increase the setting 
value (like the figure below) , press or hold down to increase the setting value automatically.

BUTTON

BUTTON

BUTTON

BUTTON

BUTTON X 3 SECONDS

The button function instruction

Press button              to switch between main 

screen, digital screen, and the power test 

screen.

Press button            one time to enter the 

setting screen or to back to the main 

screen from any screens.

In the screen with trip meter, hold down button

           for 3 seconds to reset the trip meter.

3-4

In digital screen: 

              

Press button

to enter the Power test 

screen.

In setting screen: 

Press button            to get back to the main 

screen.

In main screen: 

Press button            to enter the 

setting screen.

In main screen: 

Press button              to enter 

digital screen.

The screen switch instruction

In power test screen: 

Press button              to back to the main screen.

Press button            to return to the main 

screen in any screen.

Cortesia de www.motomarcadores.com

Cortesia de www.motomarcadores.com

Summary of Contents for RS DYNO


























Reviews: