F
NOTE
INSTALLATION INSTRUCTIONS.
When installing, please follow
the process.
1.M5 x 12L screw x2
2.Meter bracket for handle bar
3.Fix the bracket on handle bar
(7/8 inch)
4.M5 x 18l screw x2
5.M5 washer x2
6.Meter fixed board
7.Fix the meter on the board (6)
With the screw (4)
8.Fix the meter and the bracket
together
Adjust the meter to
the best visible angle
before tightening the screw
Green / Ground wire connect to the
vehicle body or the engine (It must
be a good ground)
Brown / "+"Wire connect key on
DC 12V
main power switch
Red / Postive pole (Connect
to the battery
DC 12V
)
Ground (TYPE A)
Ground (TYPE B)
RPM wire set
Choose either Type A or Type B RPM wire according to the need
and then follow the instruction below to install at the proper position.
NOTE
NOTE
NOTE
NOTE
2-1
Wiring installation instructions
Digital speed signal sensor (Accessory 7)
Magnet (Accessory 8)
The RPM wire installation
A. Wrap the RPM wire at least 5 times around the spark plug.
A1.Use tape to fix the RPM (Type A) wire onto the spark plug wire.
A2.Use tape to fix the RPM wire (Type A) on the spark plug cap.
A3.Use tape to fix the RPM wire (Type A) on the coil positive pole wire. For some models with the coil negative wire, please tape the RPM
wire (Type A) on the negative wire to get the RPM signal. (For example, the YAMAHA V-max 1200)
B. Connect the RPM wire (type B) to connect to the ignition coil positive pole.
B1. Wrap the RPM wire (type B) on the spark plug wire by connecting the male and female connector.
C.Connect the RPM wire (Type A) to the pick up.
D.Parrallel the RPM wire (Type A) with the original tachometer signal wire (This method is available only when the original speedometer
comes with a tachometer on it. You could get the RPM wire information from the service manual of your bikes.)
E. For the models comes with the new ignition coil, please wrap the RPM wire (Type A) at least 5 times around the spark plug as the above drawing.
F. Use the method mentioned above to install the RPM wire, and then connect the ground wire to the frame body or the engine. (Please
make sure that the ground is a good ground.)
For multi-ignition models, we will suggest you to get the signal on the first ignition.The best signal source will be in order as D>C>B>A, we will
suggest you to check different ways if you have problems to get the RPM signal.
EM
S
C
D
I
A
A
1
A
3
C
B
1
B
A
2
E
D
Power wire (Accessory2)
Temp sensor wire set (Accessory 5)
TH-01 PT1/8water temp sensor(Accessory 6)
Black / Fuel (
―)
LCD meter (Accessory 1)
YAMAHA
HONDA
SUZUKI
KAWASAKI
SYM
KYMCO
PGO
Main switch wiring reference:
Power
Ground
Brown
Brown
Black
Green
The color listed above may differ depending
on the model.
Black
Black
Black
Black
Green
Green
Key on
Red
Red
Red
Red
Red / White
Orange
Green
Red / Black
White
Black / Yellow
Yellow / G
reen
YAMAHA
HONDA
SUZUKI
KAWASAKI
BMW
BENELLI
APRILIA
Light Blue
Yellow / Blue
Yellow / Black
Black
Gray / Violet
Gray / Violet
DUCATI
BUELL
CAGIVA
H-D
MV
Gray / G
reen
Gray / G
reen
Gray / Yellow
Pink
Pink
Red
TRIUMPH
RPM wiring reference:
The color listed above may differ depending
on the model.
YAMAHA
SUZUKI
HONDA
Yellow / White
Yellow / White
The fuel sensor is electronic type, please don't
parallel connection with the original- otherwise
the fuel gauge won't display.
The wrong installation of the fuel wiring may
cause the meter break.
Green
Fuel indicator wiring reference:
KAWASAKI
SYM
KYMCO
PGO
Black / L Green
Gray
Yellow / White
Yellow / White
RPM wire set-type
A
(Accessory 3)
RPM wire set-type
A
(Accessory 3)
RPM wire set-type
B
(Accessory 4)
Ignition coil positive
Coil
Spark plug wire
Spark
Spark plug
cap
pick up
Tachometer
Flywheel
Ignition
pulse
When connecting the power wiring, please follow the instruction. If you connect the red & brown wiring in parallel will cause the meter work improperly.
The temperature will disappear if you don't install & connect the temperature sensor with the meter.
2-2
7
6 4
5 1
2
3
2
wh022ba04d-
1
