1
Connection handle - rescue
Shoulder connection
Closing zipper
Guide sheath
Rescue container
Rescue handle
5
52
1
2
3
4
5
6
4 Insert the reserve risers in the guide sleeve, then close it
using the Velcro zipper.
KANIBAL RACE II & ST
2
6
2
Only use a reserve handle suitable for the harness. BE CAREFUL
Only use a reserve handle suitable for the harness. BE CAREFUL
of the total length between the handle and the container. This
of the total length between the handle and the container. This
must not exceed 40cm. If in doubt, contact us:
must not exceed 40cm. If in doubt, contact us:
4
5
5 Place the reserve, and the rest of the risers, in the container.
Place the reserve so that the connection with the handle is
against the seat and as close as possible to the location of said
handle (see drawing).
3
Preparing your harness
Installation of the reserve parachute
The rescue parachute should be installed in the container as
follows :
1 Connect the handle to the rescue parachute, using a lark’s
head.
2 Connect the rescue risers to the parachute using a suitable
connection (see page 51).
3 Connect the rescue risers to the shoulders, using a suitable
connection (see page 51).
Summary of Contents for Kanibal Race II
Page 35: ...Bons Vols...
Page 69: ...Have a nice flight...
Page 103: ...Wir w nschen dir einen guten Flug...
Page 104: ......
