Kortel Design Kanibal Race II, User Manual

Page: 51 / 104

KANIBAL RACE II & ST
The volume of the integrated container lets you carry a rescue
parachute with a volume of between 2.6L and 5.3L. If a
parachute with a volume exceeding the maximum permissible
volume is fitted, its correct deployment cannot be guaranteed.
When using a dirigible rescue parachute with integrated risers,
these integrated risers must be connected directly. Shoulder
mounting can be carried out as described above.
Please refer to the manufacturer's installation and usage
precautions.
A minimum resistance of 2400daN is imperative for any A minimum resistance of 2400daN is imperative for any
connector used in the "rescue-lift" link. For the "risers-safety connector used in the "rescue-lift" link. For the "risers-safety
harness" link: 1200daN harness" link: 1200daN
Flexible connectors must not be used on straps wider than 25mm.
Flexible connectors must not be used on straps wider than 25mm.
For quick links, refer to the manufacturer's recommendations. For quick links, refer to the manufacturer's recommendations.
The connection of the rescue risers to the shoulder loops can
be done in different ways:
« Quick links »
« Soft-Link »
« Kite loop »
« T-Bone Link »
More detailed information is available at
More detailed information is available at www.korteldesign.com www.korteldesign.com
A lark's head connection is considered correct when the 2 loops A lark's head connection is considered correct when the 2 loops
are well centred to each other and tightened by hand as tightly as are well centred to each other and tightened by hand as tightly as
possible. There should be no relative movement possible between possible. There should be no relative movement possible between
the 2 parts. the 2 parts.
Preparing your harness
Installation of the reserve parachute
51
It is imperative to choose connectors wisely. The dimensions
and shape must be adapted to the connecting straps of the
harness and to the rescue risers of the parachute, so that the
effort under load is applied in an optimal way.
The reserve risers of the ventral parachute can also be
connected to the main anchorage points.
We recommend using a connection system separate from the
main canopy connectors.