RK-100S Owner's manual
18
Trouble shooting
If you suspect a malfunction, please check the following
points. If this does not resolve the problem, please contact
a nearby dealer.
Power does not turn on
• Is the AC adapter connected to an AC outlet? (See page
•
Are the batteries depleted?
Hold down the SHIFT button and press the G button
to check the remaining battery power level (See page 16
“Battery type and remaining power”).
•
Have the batteries been inserted with the correct
orientation? (See page 8 “Using batteries”)
Automatically turns off
•
Has the auto power off function been enabled? (See page
No sound
• Are your powered monitors or headphones connected to the
jack correctly ? (See page 7 “Connections”)
• Is the connected monitor system powered-on, and is the
volume raised?
• Is the VOLUME knob set to a position where sound will
be output?
Nothing happens when the OCTAVE UP or DOWN
button is pressed.
•
Is a shift function being set?
Press the SHIFT button to exit the shift function.
Cannot input sound
• Has the mic that will be used as the modulator with
the vocoder program been correctly connected to the
INPUT jack?
• Has the Input select switch been set appropriately?
Arpeggiator will not start
•
Is the arpeggiator on (ARP button lit up)?
No sound is produced when the RK-100S is controlled
with the long ribbon controller
•
Have the shift functions been used to change the long
ribbon velocity to oFF?
Select any setting other than oFF. (See page 15 “Long
•
Have the shift functions been used to change the long
ribbon MIDI channel?
Specify the same MIDI channel for producing sound.
(See page 15 “Long ribbon MIDI channel”)
No sound produced from an external MIDI sound
generator that’s connected with a MIDI cable
• Is the MIDI cable connected correctly? (See page 7
• Does the MIDI channel of the external MIDI device match
