Korg pa2X pro, User Manual

Page: 210 / 348

206
Sequencer operating mode
Mixer/Tuning: Volume/Pan
Tabs
Use tabs to select one of the edit pages of the current edit section.
Mixer/Tuning: Volume/Pan
This page lets you set the volume and pan for each Song track.
Use the TRACK SELECT button to switch between Song tracks
1-8 and 9-16.
Dry
Use this checkbox to turn the dry (direct) signal on or off.
Note: If the track is sent to a separate output, no FX is sent to any
output. To program the output status for each track, see “Audio
Setup: Player 1” on page 232.
On When checked, the direct, dry signal is sent to the
output, mixed with the FXs.
Off When unchecked, the direct, dry signal is
removed from the audio output, and only sent to
the FXs. The effected signal will still be panned
(in stereo FXs only) according to the Pan value.
Pan
Track position in the stereo field.
L-64…L-1 Left stereo channel.
C 00 Center.
R+1…R+63 Right stereo channel.
Volume
Track’s volume.
0…127 MIDI value of the track’s volume.
Play/Mute icon
Track’s play/mute status.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Mixer/Tuning: FX Send
This page lets you set the level of the track’s direct (uneffected)
signal going to the Internal FX processors. The effect processors
included in Pa2X are connected in parallel, so you can decide
which percentage of the direct signal can be effected.
In case you want to send all of a track’s signal to the effect (as
when using “insert” effects, like Rotary, Distortion, EQ…), just
set the Dry parameter to Off (see “Dry” above).
There are four Internal FX processors in Sequencer mode,
grouped in two pairs (AB and CD). Usually you will create Songs
with only a pair (preferably AB), but you can create Songs using
both FX pairs. We suggest to use A and C as reverb processors,
and B and D as modulating effect processors.
Use the TRACK SELECT button to switch between Song tracks
1-8 and 9-16, and vice-versa.
Track Out L/R
FX Processor
Track Out L/R
FX Processor