Korenix JetNet 4000, User Manual

Page: 21 / 49

Web-based Management
Korenix JetNet Series Industrial Web-Managed Ethernet Rail Switch User’s Manual 3-5
Link : Down indicates that connection is not established, while Up indicates that the connection
is successfully established.
State : indicates whether this port is Enabled or Disabled . Disconnection will be seen as
Disabled .
Negotiation : Auto means that the JetNet will auto-negotiate the speed (10 or 100 Mbps) of the
remote device, and the transmission mode (full or half duplex). Force means that the JetNet runs
according to your settings.
Speed Duplex : indicates the port speed. Config column shows the configuration set up by users.
The Actual column shows the actual speed of the port.
Flow Control : Symmetric: you need to activate the flow control function of the remote network
device in order to let the flow control of that corresponding port on the JetNet to work.
Asymmetric: you don’t need to activate the flow control function of the remote network device.
The flow control of that corresponding port on the JetNet will work anyway.
Single Port Status
You can directly click on any port on the panel display on the left side to see its information.
Port Statistics
In this section, you can see all kinds of statistics of each port. Click on Clear to remove any
counts.
Port Control