Korenix JetNet 4000 Series Industrial Web-Managed Ethernet Rail Switch User’s Manual
3-4
IP Configuration
This section is to set up the JetNet’s IP address.
SNTP
This section is to enable the network time server.
IP Security
This section is to set up the IP address which allows users to access the JetNet from the web.
RSTP
This section is to enable and configure the RSTP function.
Super Ring
This section is to enable and configure Super Ring settings.
QoS
This section is to enable and configure QoS(Quality of service) settings.
IGMP
This section is to enable and configure the JetNet’s IGMP Snooping function.
Security Manager
This section is to change the username and the password.
Configuration Backup
This section is to backup the JetNet’s settings to a file on your PC.
TFTP Update Firmware
This section is to use TFTP utility to update the latest firmware to the JetNet.
Factory Default
This section is to restore the factory default settings.
Save Configuration
This section is to save the JetNet’s settings.
System Reboot
This section is to reboot the JetNet.
Rate Control
Set up every port’s bandwidth rate and packet limitation type.
Configuring Your JetNet 4000
Port Status
In this window, you can see every port’s status.
Port
: indicates the port number.
Type
: indicates the speed mode of the port. For example, 100TX means 100 Mbps.
Summary of Contents for JetNet 4000
Page 4: ......
Page 8: ......
Page 16: ...Korenix JetNet 4000 Series Industrial Web Managed Ethernet Rail Switch User s Manual 2 8...
