8
Getting Start | Korenix
Serial console screen
To log in, type the Login name and password as requested. The default values as
following.
Login: root
Password: none
2-1-2
Telnet Console
If you know IP addresses and netmasks, then you can use Telnet to connect to JetBox9500.
The default IP address and Netmask for each port is given below:
Default IP address
Netmask
LAN
192.168.10.1
255.255.255.0
WAN
DHCP
Default IP address and Netmask
Use a cross-over Ethernet Cable to connect directly from your PC to JetBox 8100. You
should first modify your PC’s IP address and netmask so that your PC is on the same
subnet as JetBox.
To connect to a hub or switch connected to your local LAN, use a straight-through
Ethernet cable. The default IP address and netmasks are shown above. To login, type the
Login name and password as requested. The default values as following:
