Korenix | Network Feature
31
Start command
Stop command
Support command
pppoe-connect
pppoe-setup
pppoe-start
pppoe-stop
pppoe-status
Default
down
Point-to-Point Protocol over Ethernet is a network protocol for encapsulating Poing-to-Point
Protocol (PPP) frames inside Ethernet frames. It is used mainly with ADSL services where
individual users connect to the ADSL transceiver over Ethernet.
You can just inpput pppoe-setup to configure the PPPoE. First you should obtain PPPOE
username and password from your Internet provider. Second, filled in these parameters to
pppoe-setup dialog:
Ethernet Interface: wan
User name: <from your ISP>
Activate-on-demand: No
Primary DNS: 168.95.1.1
Firewalling: NONE
# pppoe-setup
Welcome to the Roaring Penguin PPPoE client setup. First, I will run
some checks on your system to make sure the PPPoE client is installed
properly...
Looks good! Now, please enter some information:
USER NAME
>>> Enter your PPPoE user name (default [email protected]): [email protected]
INTERFACE
>>> Enter the Ethernet interface connected to the DSL modem
(default eth0): wan
Do you want the link to come up on demand, or stay up continuously?
>>> Enter the demand value (default no): no
