Korenix JetBox5400 series, User Manual

Page: 47 / 73

Korenix | Network Feature 47
NOTE

The default port for linkbeat_use_polling is port 1

keepalived currently not support Virtual MAC address
4-21
PTPD
Service name ptpd
Description Precision Time protocol (PTP) version 1 daemon
Config files
Start file
Start command ptpd
Default down
Usage: ptpd [OPTION]
-c run in command line (non-daemon) mode
-f FILE send stats to FILE
-S send output to syslog
-T set multicast time to live
-d display stats
-D display stats in .csv format
-R record data about sync packets in a file
-x do not reset the clock if off by more than one second
-O do not reset the clock if offset is more than NUMBER nanoseconds
-M do not accept delay values of more than NUMBER nanoseconds
-t do not adjust the system clock
-a NUMBER,NUMBER specify clock servo P and I attenuations
-w NUMBER specify one way delay filter stiffness
-b NAME bind PTP to network interface NAME
-u ADDRESS also send uni-cast to ADDRESS
-l NUMBER,NUMBER specify inbound, outbound latency in nsec
-o NUMBER specify current UTC offset
192.168.2.255 dev lan
}
} 192.168.2.255 dev lan
}
}