EN
** If PC functionality is not required at this stage - simply press and hold the CPU Power Button and operate the 3D Printer as described from
8. below.
5. Follow instructions on monitor to load and configure Windows 10 from the previously inserted USB Drive. YOU
MUST ONLY SELECT WINDOWS 10
HOME EDITION
- otherwise your software key supplied with your Windows
10 Disk inside the box will be invalid.
6. Once Windows 10 has completed the installation, connect to the Internet following the Windows 10 on screen
instructions (you may require a cable connection from the PC Motherboard your Internet router or use a USB wireless
Internet dongle, if your router offers wireless connectivity).
7. Once connected to the Internet, download and install the free Open Source Arduino IDE and Repetier-Host
Software programs from the links below.
https://www.arduino.cc/en/Main/Software
Repetier-Host (optional donation) -
https://www.repetier.com/download-software/
https://www.repetier.com/download-now/
For users unfamiliar with Repetier-Host, full details of Repetier-Host set-up for the Kora Pro 3D PC please
refer to the document ‘Instructions_RepetierHost_KoraPro3DPC_Rev01.pdf’ - located on the USB Stick Drive
supplied with the machine in the sub-folder /Kora/Instructions.
8. Attach Filament Spool Holder as shown below.
9. Take a reel of filament and remove from packaging, taking care to save the plastic bag and bag of silicon for
storing filament after use (It is recommended not to store filament for a prolonged period in any kind of moist/damp
environment).
You will notice the free end of the filament is held in the hole on the reel. It is important to ensure the filament is able
to unravel freely from the spool, without being knotted or snagged. Keeping track of the filament end is good practice
and should be returned to the hole when the spool is not in use.
Place filament spool on to the spool holder as shown overleaf.
6
Rev001/01/2018 Kora Pro PC
