EN
REMOVING THE PACKAGING
Having taken delivery of your brand new Kora Pro 3D PC Printer, carefully remove the reusable packaging. The 3D
Printer should ALWAYS be repackaged as received when transporting -
the manufacturer or supplier cannot be
held responsible for any damage caused during transportation of a machine not correctly repackaged in
its original packaging.
WARNING: Only lift the Kora Pro 3D PC by the metal frame,
NEVER
lift by the printing mechanism, support rods,
conduit wiring loom or
toothed belts. See ‘Removal Guide Sheet’ Supplied with the machine packaging.
Once all the outer packaging has been removed and stored for future use, place the 3D printer on a stable and level
surface for example a table or bench, in a well ventilated area.
1. Taking care not to interfere with the Drive Belts, carefully cut the two cable ties holding the Main Printer Head
Block in place during transportation.
2. Slightly raise the Printer Bed by twisting the rear Bed Lead Screw clockwise with your fingers.
3. Remove cardboard Accessory Box and check contents according to the checklist enclosed in the box.
4
Rev001/01/2018 Kora Pro PC
