26
26
Digital Control Module
Digital Control Module
: User's secret code must be registered by user.
(Factory setting code is "1234".)
CAUTION
3)SECRET CODE REGISTRATION
STEP 1. Press the switch 20 times at standby mode and then LED blinks 2 times.
STEP 2. Knock the sensor more than 5 times within 30 seconds.
During the numbers automatically count with delay each 2 seconds from 0 to
9,knock the sensor at a number you want. Then selected number blinks 5
times and it automatically repeat next number from"0".
And if you input consecutively all 4 numbers as upper STEP 2, a new code is
inputted.
If you want to change the secret CODE, you have to just repeat STEP 1-2.
CAUTION
: If you input a wrong code 5 times within one hour, "U" is marked and all
functions are stopped for one hour.
If you press the switch, this function is canceled.
CN7 4Pin Digital control module(Optional)
-Digital door unlock/lock, digital/manual valet, LED, driver call function
-User can unlock the door without transmitter by input the secret code that user register.
-User can operate door lock function to simple operation without transmitter at the parking.
-If you input the wrong code, the security function is operated.
1. OPERATING (Digital code valet operation is refer to P2-1, 19page.)
Operation of all function must be started in the standby mode that the display
segment slowly rotate.
1)DOOR LOCK
STEP 1. If you press the switch one time in the standby mode, LED blinks one time
and the display segment is rotated fast.
(This function is maintained for 30 seconds.)
STEP 2. Knock the sensor more than 5 times after get off the car within 30 seconds
and close the all doors, then door will be locked.
(If you press the switch again within 30 seconds, LED blinks 2 times and lock
function is canceled.)
2)DOOR UNLOCK
STEP 1. Knock the sensor more than 5 times at the standby mode.
(The call function is operated one time at the first knock.)
STEP 2. During the numbers automatically count with delay each 2 seconds from 0 to
9, knock the sensor at the registered CODE. Then selected number blinks
5 times and it automatically repeat next number from "0".
STEP 3. Select the remainder 3 CODES as upper STEP 2.
If you select all CODES in order, door open function is operated.
