19
19
(Code is same to digital door lock code. See 26page.)
STEP 1. Press the switch for 5seconds when the digital control module is standby mode,
and then LED blinks one time and the display segment is rotated fast.
(This function is maintained for 30 seconds.)
STEP 2. Knock the sensor more than 5 times after get off the car within 30 seconds,
then the digital code start count. (If you press the switch again within 30 seconds,
LED blinks 2 times and digital valet function is canceled.)
STEP 3. During the numbers automatically count with delay each 2 seconds from 0 to
9, knock the sensor at the registered CODE. Then selected number blinks
5 times and it automatically repeat next number from "0".
STEP 4. Select the remainder 3 CODES as upper STEP 3.
If you select all CODES in order, valet mode is ON.
Operating method
2-3 Passive arming
When turned ON, the system will arm automatically after 30seconds if the ignition
key is OFF and door open/close.
2-4 Passive lock
When turned ON: When the system is arm by passive arming, door lock will be
automatically operated.
2-5 Last door arming
When turned ON, if all door is closed at the disarm, door lock will be operated
with arm after 30seconds.
CAUTION
2-6 Chirp sound
In the default setting, siren of the vehicle will output chirp sound when you
operate transmitter.
Program Menu P-2 for Basic Function
Program Menu P-2 for Basic Function
2-1 Digital code valet mode
In the default setting: Valet is operated to ON/OFF if you press the valet button for
5seconds at the ignition key ON. (See 10page about the valet mode.)
2-7 Double door unlock pulse
(Only used by the install engineer)
When turned ON, door unlock output will output 2times whenever unlock.
When turned ON: You can use the digital code valet function.
2-2 Ignition lock/unlock
When turned ON, the doors will be locked when step on brake after the ignition
is turned ON. The doors will be unlocked when the ignition is turned OFF.
Getting on the vehicle during remote start: Door is locked when ignition key ON
and then step on the brake.
If you want to cancel the valet mode, press the valet button for 5 seconds at the ignition
key ON.
Program Menu
Program Menu
