Kopel KR-8800, Operation & Installation Manual

Page: 12 / 32

Press the button
The engine turn off
after 2mins
This is function for maintain of the engine ON
for 2minutes after the door is locked.
(This is in use to aid function of the turbo vehicles)
Open and close
the door
: Program menu P3-7 (See 20page) Turbo time setting
Turbo function ON : Set the P1-1 function to the ON
in the program setting ( See 17page)
Press the button
2times if you want
that engine turn off
immediately.
10 10
Auto turbo function Auto turbo function
Start Functions Start Functions
OFF
ACC
Ignition key OFF
ON
1chirp
Display
VALET mode VALET mode
~~
ON: 1 Chirp
OFF: 2 Chirps
OFF
ACC
ON
IGNITION ON
Press and hold the button
for more than 5sec
Display
The function is normally functioned
if you repeat again.
(Valet icon is off on the display)
Use this function when you leave your car to other person that don't know how
to use this transmitter.
In the case of the valet mode, you can operate only door lock/unlock and trunk
open by transmitter.
VALET ON/OFF
(See 2-1 Digital code valet mode of 19 page )
Upper valet function is general method and Digital code valet function see the
19,26 page.
Repeat start operation Repeat start operation
This function
is operated
in arm mode.
Auto start setting
If this function is set,
start will automatically
operated total 8times
for 24hours. And set
function will cancel
at the disarm.
+
Press the door and M button
for 2sec
in arm mode
simultaneously
M
This function is operated each every 3 hours.
The start time is operated for setting start time. (Default : 15 minutes.)
: This icon is turned on when turbo function is setting.