mITX-BDW-U – User Guide, Rev. 1.6
www.kontron.com
// 83
Hardware Health Configuration
System Temperature readout is the temperature measured by the selected sensor via
System Temperature Ext Type. If disabled then the onboard sensor is used.
Function
Selection
Description
System Temperature Ext
Type
Disabled (Note 1)
LM75 @ 0x90
OneWire @ GPIO16
Use external connected sensor instead of onboard.
Fan Cruise Control (Note 2) Disabled
Thermal
Speed
Disabled = Full speed.
Thermal: does regulate fan speed according to
specified temperature.
Speed: does regulate according to specified RPM.
Fan Settings
10 – 90 (Note 3)
1000 – 10000 (Note 4)
Fan Min limit (Note 5) 0 (Note 6)
Minimum PWM %, can be used to make sure fan is
always active. Make sure Min limit < Max limit.
Fan Max limit (Note 5) 100 (Note 6)
Maximum PWM %, can be used to limit the fan noise.
Make sure Min limit < Max limit.
Watchdog Function
0 - 255 (Note7)
0 = Disabled.
Enter the service interval in seconds before system will
reset.
Summary of Contents for mITX-BDW-U
