Kontron mITX-BDW-U, User Manual

Page: 40 / 105

mITX-BDW-U – User Guide, Rev. 1.6
www.kontron.com // 40
Signal Description
EGCLK Extend GPIO Clock signal
EGAD Extend GPIO Address Data signal
EGCS# Extend GPIO Chip Select signal, active low
TMA0 Timer Output
+12 V Max. load is 0.75 A (1.5 A < 1 sec.)
The GPIO’s are controlled via the ITE IT8528E Embedded Controller. Each GPIO has 100 pF to ground, clamping diode to
3.3 V and has multiplexed functionality. Some pins can be DAC (Digital to Analogue Converter output), PWM (Pulse
Width Modulated signal output), ADC (Analogue to Digital Converter input), TMRI (Timer Counter Input), WUI (Wake Up
Input), RI (Ring Indicator Input) or other special functions.
Signal IT8516F pin name Type Description
GPIO0 DAC0/GPJ0 AO/IOS
GPIO1 DAC1/GPJ1 AO/IOS
GPIO2 DAC2/GPJ2 AO/IOS
GPIO3 DAC3/GPJ3 AO/IOS
GPIO4 PWM2/GPA2 O8/IOS
GPIO5 PWM3/GPA3 O8/IOS
GPIO6 PWM4/GPA4 O8/IOS
GPIO7 PWM5/GPA5 O8/IOS
GPIO8 ADC0/GPI0 AI/IS
GPIO9 ADC1/GPI1 AI/IS
GPIO10 ADC2/GPI2 AI/IS
GPIO11 ADC3/GPI3 AI/IS
GPIO12 ADC4/WUI28/GPI4 AI/IS/IS
GPIO13 RI1#/WUI0/GPD0 IS/IS/IOS
GPIO14 RI2#/WUI1/GPD1 IS/IS/IOS
GPIO15 TMRI0/WUI2/GPC4 IS/IS/IOS
GPIO16 TMRI1/WUI3/GPC6 IS/IS/IOS
GPIO17 L80HLAT/BAO/WUI24/GPE0 O4/O4/IS/IOS
Available cable kit and Break-Out-Board:
PN 1052-5885 Cable, Feature 44pol 1 to1, 300 mm PN 820978 Feature BOB (Break-Out-Board)