Kontron mITX-BDW-U, User Manual

Page: 18 / 105

mITX-BDW-U – User Guide, Rev. 1.6
www.kontron.com // 18
3.3. Processor Support Table
mITX-BDW-U is designed to support the following BGA1168 mobile processors:
 5th generation Intel® Core™ i7 processor
 5th generation Intel® Core™ i5 processor
 5th generation Intel® Core™ i3 processor
The BGA CPU is premounted at the factory. Kontron has defined the board versions as listed in the following table.
Currently, all board versions are based on Embedded CPUs. Other versions are expected later.
mITX-BDW-U variants CPU
Name Sales PN Speed Embed. Cache
mITX-BDW-U i7-5650U 810610-4500 3.2 GHz Yes 4 MByte
mITX-BDW-U i5-5350U 810611-4500 2.9 GHz Yes 3 MByte
mITX-BDW-U i3-5010U 810612-4500 2.1 GHz Yes 3 MByte
For sufficient cooling of the CPU conditions such as the worst-case maximum ambient operating temperature and the
actual worst-case load of processor must be considered.
The mITX-BDW-U is delivered with a premounted heatsink:
Component Technology Overall
Dimentions
(mm) Fin
Arranngement Fin Detail
(mm) Fin
Pitch
(mm) TM Detail
CPU Extruded
Aluminium 70 x 70 x
16.8 Plate Fn 11.8 x 1.0
(x13) 5.7 Lard T-
PCM 585
3.4. System Memory Support
The mITX-BDW-U has two DDR3L SO-DIMM sockets. The sockets support the following memory features:
 2x DDR3L, 1.35 V, SO-DIMM 204-pin
 Dual-channel with one SO-DIMM per channel
 From 1 GByte and up to 2x 8 GByte.
If using 32bit OS, less than 4 GB are displayed in the system
(Shared Video Memory/PCI resources is subtracted).
 Single/dual rank unbuffered 1333/1600MT/s (PC3-10600/PC3-12800)
 SPD timings supported
 ECC not supported
The installed DDR3L SO-DIMM should support the Serial Presence Detect (SPD) data structure. This allows the BIOS to
read and configure the memory controller for optimal performance. If non-SPD memory is used, the BIOS will attempt
to configure the memory settings, but performance and reliability may be impacted.