KONTRON
Parallel Port Interface
32
CMP/P3 and CMP/C3 User’s Guide
16.2
Configuration
The parallel-port mode, I/O addresses, and IRQs are changeable from the BIOS Setup Utility. You
can enable, disable or set the parallel port to auto. You can program the base I/O-address 378h
(default), 3BCh or 278h. You can set the parallel port mode to output only, bi-directional, EPP and
ECP. You can choose IRQ5 or IRQ7 as the parallel-port interrupt.
Refer to the I/O Device Configuration Submenu in the Appendix B: BIOS Operation chapter for
additional information on configuration.
