75
5.
Disconnect all cables attached to the backplane board.
6.
Remove the HDD bay assembly cover plate by loosening the screw that fastens it to
the drive bay assembly. (Figure 67 “A”)
Slide the cover plate towards the side chassis wall (“B”) to release the four tabs.
(“C”)
Lift the cover plate off of the HDD bay assembly. (“D”)
Figure 67. Removing the HDD Bay Assembly Cover Plate
7.
Lift the backplane board part way out. (Figure 68, “A”)
Disconnect the power cable. (“B”) from the front of the backplane board (“C”)
