Product Description
20
Box-PC SC-85 – User Manual
Assembly of the Cable Support Plate with PCMCIA Card Holder
1.
The PCMCIA card holders (single or dual) are mounted in the elongated slots
of the cable support plate by M3 screws (do not over tighten). The PCMCIA
card holders position should be adjustable (freely mobile in the elongated
slots of the cable support plate).
2.
Locate the locking tab of the cable holder plate in the left slot on the interface
side of the Box-PC and the holes for the securing to the Box-PC over the
corresponding tapped holes at the front side of the device. Attach the cable
support plate firmly with the provided M4 screws to the Box-PC.
3.
The installed PCMCIA-card/s will be fixed by the PCMCIA card holder/s, to
avoid unwanted ejection of the PCMCIA-card/s.
4.
Slide the floating card holder towards the PCMCIA card as far as it will go.
Hold the PCMCIA card holder and screw it on in this position to the cable
support plate firmly.
Power Supply Unit
The Box-PC SC-85 can be equipped alternatively with an AC or a DC power
supply.