Kontron Embedded Computers KISS 4U User Manual Download Page 3

Page: 3 / 55

Contents

KISS 4U - User’s Manual (V1.10)

Contents

Introduction.......................................................................................................... 3

Symbols used in this Manual ................................................................................. 4

Important Instructions......................................................................................... 5

Note on the Warranty............................................................................................. 5

Exclusion of Accident Liability Obligation............................................................... 5

Liability Limitation / Exemption from the Warranty Obligation ................................ 5

Safety Instructions .............................................................................................. 6

Operation of Laser Source Devices ....................................................................... 6

Electrostatic Discharge (ESD) ............................................................................... 7

Grounding Methods........................................................................................... 7

Instructions for the Lithium Battery ........................................................................ 8

FCC Statement ...................................................................................................... 8

Electromagnetic Compatibility................................................................................ 9

Scope of Delivery............................................................................................... 10

Type Label and Product Identification.................................................................. 10

Product Description .......................................................................................... 11

Front Side ............................................................................................................ 17

Interfaces on the Front Side ............................................................................ 19

LED Indicators................................................................................................. 19

Operating Elements ........................................................................................ 20

Front Access Door .......................................................................................... 21

Filter Mat Holder.............................................................................................. 21

External Accessible Drive Bays....................................................................... 21

External Accessible Slim-Line or Internal 3.5" Drive Bay (Option) .................. 21

Rear Side............................................................................................................. 22

Interfaces on the Rear Side............................................................................. 23

Power Supply Unit........................................................................................... 24

Fan Slide-In Module ........................................................................................ 25

Side View............................................................................................................. 26

Assembly, Disassembly.................................................................................... 27

Attaching the Rubber Feet ................................................................................... 27

Removing the Drive Locking Screws ................................................................... 27

Summary of Contents for KISS 4U
























































Search results

Summary of Contents for KISS 4U

Reviews:

Related manuals for KISS 4U

Brands by name

Popular brands

Kontron Embedded Computers KISS 4U, User Manual

Search results

Summary of Contents for KISS 4U

Reviews:

Related manuals for KISS 4U

Brands by name

Popular brands