Standalone DVR SEC-DVR309/SEC-DVR316 User Manual
53
4
Alarm Record
This shows the partition size (%) that stores alarm recording
data. Please follow the Text Input method described in
Chapter 5.1 Text Input
to change the value.
Please note that
if the alarm record percentage for all HDDs is zero, the
alarm video/audio will be recorded in normal record
partition for software V6.13 or above.
5
Mode
Click to format the HDD.
Note: If the HDD has not been formatted yet, it will be
formatted and partitioned with default record size, 30% for
Alarm record and 70% for Normal record. If it has been
formatted before, it will be formatted according to the Alarm
REC Size (%) and Normal REC Size (%) displayed on the
screen, but the previously recorded contents within the new
size won’t be cleared and will be accessible.
6
SEQ
Click to clear the HDD.
Note
: If the HDD has not been formatted yet, it will be
formatted and partitioned with default record size, 30% for
Alarm record and 70% for Normal record. If it has been
formatted (and recorded) before, it will be partitioned according
to the Alarm Record Size (%) and Normal Record Size (%)
displayed on the screen, and the previously recorded contents
will all be cleared.
7
CALL
Press this button to physically format the selected HDD. A
confirmation dialog will be shown on the screen, press
ENTER
to confirm, or
ESC
to cancel. Please note that the recording
will be always optimized for performance & lifetime no matter
it’s for the first time or for the one hundredth time. The
formatting would take less than 1 minute. We strongly
recommend that the user use this physical format function to
format the HDD for the first time.
Note
: The HDD will be physically formatted and partitioned
with default record size, 30% for Alarm record and 70% for
Normal record. All the previously recorded contents will be
cleared.
