Standalone DVR SEC-DVR309/SEC-DVR316 User Manual
18
Power
Connect DC 12V power source to DC 12V Input.
4.6
Optional Connections
Ethernet
Connect the Ethernet connector to a standard twisted-pair Ethernet cable for remote access via LAN or
internet. Please make sure to setup the related configurations as described in
Section 7.7.10 Network
Setup
.
USB 2.0 disk drives, DVD+RW, card reader, etc.
If the user wants to use USB2.0 peripheral device to retrieve important recorded images and/or audio,
please connect it to the USB port connectors (one on the front panel, the other on the back panel).
Call monitor
Connect the call monitor output connector to a surveillance TV monitor. This monitor displays the full
screen images of the cameras associated with the events (alarm or motion) or the images from the
installed cameras sequentially according to the SEQ Display Setup (
Section 7.7.4 SEQ Display Setup
)
for call monitor.
PTZ Cameras
Connect the RS-232 connector or the RS-485 connector to PTZ camera(s) via the appropriate cable.
The system supports a variety of different PTZ cameras, including Pelco D protocol Dome, SamSung
SCC-641P, Kalatel Cyber Dome, Bosch AutoDome, etc. But different PTZ cameras can coexist in a
system only if they support the same protocol. Please make sure to set the PTZ ID of the camera(s),
and setup the camera (
Section 7.7.1 Pre-Camera
), and RS-485 (
Section 7.7.9 RS-232/422/485
)
accordingly. Please also make sure to set the RS-485 Selector Switch if you are using the RS-485 port.
(Please refer to
Chap 8. PTZ
Control for detail information)
