Standalone DVR SEC-DVR309/SEC-DVR316 User Manual
52
7.7.6.1 HDD format and Clear
In
HDD Setup
display, press
MODE
to call up
HDD format and Clear
display
as shown below.
Each of the HDDs must be formatted before it can be used to record
video/audio.
The HDD Format/Clear screen allows the administrator to
format and/or clear each HDD, and set the size for Alarm Record
partition and Normal Record partition for each HDD.
Please note that the
HDD IDs for the internal HDDs in the DVR start from ID 1, lower for IDE and
higher for SATA, and the HDDs in the farthest Hard Disk Box have the lowest
HDD ID next to internal HDDs.
▲▼
◄►
Press these buttons to select the items.
ESC
Press this button to escape from this screen, and return to
HDD Setup
display. If the Save dialog is shown, press
ENTER
to exit and save,
ESC
to
exit without saving.
Name
Description
Alarm
the current HDD for alarm recording.
This item is just for information.
1
Recording
HDD
Normal the current HDD for normal recording.
This item is just for information.
2
Size
This shows the total storage capacity in gigabyte.
3
Normal Record
This shows the partition size (%) that stores normal recording
data.
2
3
4
5
7
6
1
