3.2 Operation of the <AV SET> Button
During normal system operation, press and hold the
<AV SET> button for a while and then release. The
system will reboot. If you press and hold the button for
over five seconds, the system will restore the default
settings.
3.3 TV OUT Function
The operational procedures of the TV OUT function
are as follows:
Connect the IP network camera to a TV set. When the
IP network camera is off, press and hold the <AV
SET> button to turn on the power. If you press and
hold the <AV SET> button for two seconds, the IP
network camera will enter TV OUT mode.
4. System Login
System login is used to identify and verify an
authorized user who is allowed to enter the system
and change functions provided by the system. The
system provides two levels of management modes:
Administrator and General User. After successful
login, the user can start network monitoring and
adjust setting as follows:
Step 1: Start the login window. Please refer to the
following mode:
Mode 1: Run CAM_EZ Search, double click on the
corresponding IP network camera name in the IP
network camera list.
Mode 2: Start Internet Explorer, and directly enter the
IP address of the IP network camera in the address
bar.
