Konig CMP-NWIPCAM10, User Manual

Page: 15 / 28

Server Setup
This window is used to set the parameters of the IP
network camera related to the server.
Mail Server
It is used to set the parameters related to the mail
server and the sending of mails with images. It
depends on whether the
MAIL Image setting in
EventTrigger is enabled. The event-triggered images
will be sent to the designated e-mail address by e-
mails. The system supports
SMTP Server .
Operating procedures:
Step 1: IP/Host : Enter the IP address of the Mail
Server or Http address.
Step 2:
Mail From : Enter the e-mail address of the
sender.
Step 3:
Receipt to : Enter the e-mail address of the
recipient.
Step 4:
Account ID : Enter the Account ID for login to
the mail host.
Step 5:
Password : Enter the password for login to the
mail host.
Step 6:
Authorization : Indicates whether the mail
host will perform authentication.
Step 7: Click <
Submit >.
FTP Server
It is used for the settings related to FTP (File Transfer
Protocol) server. It depends on whether the
MAIL
Image setting in EventTrigger is enabled. The event-
triggered images will be transferred to the designated
FTP Server in FTP mode. This system supports
Port
Mode and Passive Mode .