E-11
Note:
When installing the Local Interface Kit EK-611,
pass its cable together with the cable above
through the wire saddles and the edge cover.
(46) Attach the supplied bracket B.
(Eight supplied screws C)
(47) Attach the supplied cover C.
(One supplied screw D)
Note:
There is a notch on the cover C as shown in the
illustration.
(48) Attach the supplied cover D.
(One supplied screw D)
(49) Attach the bracket C to the control panel.
(Two supplied screws E)
Note:
Use the supplied screw E instead of the existing
screws (removed in the step (16)).
(50) Attach the supplied bracket D to the control
panel. (Four supplied screws C)
Notch
