E-12
(51) Attach the one supplied collar to the bracket B
attached in the step (46) at the position shown
in the illustration.
(52) Insert the control panel into the shaft.
(53) Attach the one supplied collar and one screw C
to the position shown in the illustration.
(54) Attach the panel connector to the control panel.
a) Connect the panel connector to the control
panel.
b) Route the cable as shown in the illustration.
c) Remove the two cable ties shown in the illustra-
tion from the cable with nippers.
Note:
Be careful not to damage the cable covering.
Cable tie
