14
(GB)
Loading an IX240 cartridge film into the carrier
Notes
• Before inserting the cartridge, make sure that the shading lid is closed.
• Be sure to use only processed cartridge film whose process indicator tab
is removed. If you insert a cartridge with its tab intact or not removed
completely, “Not processed film is in this cartridge. Please remove the
cartridge.” appears on the screen. In this case, make sure that the
cartridge film is processed and remove the tab completely. Then insert
the cartridge film again.
• Do not touch the carrier or open the lid of the cartridge holder during
prescanning or scanning. This may cause improper scanning.
Parts identification of IX240 cartridge film
1
Press the cartridge eject lever and open the lid.
2
Insert the cartridge with the film status indicator end up.
3
Close the lid.
Film status indicators
1 Unexposed
2 Partially exposed
3 Exposed (unprocessed)
4 Processed
Shading lid
Process indicator tab
Cartridge eject lever
Make sure that the process
indicator tab is removed.
Loading the Film in the Carrier
