13
(GB)
This section explains the procedures for loading each type of film in the
carrier.
Loading a sleeve film into the carrier
Insert the film from the last frame so that the frame numbers are reversed
or the emulsion side facing you. Film is automatically fed into the carrier.
Notes
• If the film contains a transparent portion such as an exposed area of
positive film, the film cannot be fed properly. Cut off the transparent
portion.
• The curling condition of the sleeve film and film ends may cause feeding
error. Fix the film correctly before inserting it into the carrier.
For details, see “About the conditions of film ends and remedies” on page
16
(GB)
.
Loading a slide into the carrier
Insert the slide into the carrier with the emulsion side facing you, and push
in the carrier fully.
Loading the Film in the Carrier
14
DX code should be located
on the bottom
Emulsion side should
be facing you
Emulsion side should be facing you
