6
(GB)
The RX-II Film Scanner scans negative film or slides.
This manual contains precautions, explanations for installation,
connection, information for using the films, and so on.
For information about the procedures for scanning films using the Film
Scanner, please consult the Software Manual (supplied).
Scanning various types of film is possible
By changing the carriers, scanning the following types of film is possible:
• sleeve film (color negative, color positive or monochrome)
• slide (mounted 135 film, or mounted IX240 film)
• IX240 cartridge film
Selection of five scanning resolutions
You can choose from five scanning resolutions for either 135 film or
IX240 film.
The following shows the available resolution modes and the number of
scanned pixels when 135 film is scanned in the normal cropping mode.
• Thumbnail (192
×
128 pixels)
• Low (384
×
256 pixels)
• Standard (768
×
512 pixels)
• High (1,536
×
1,024 pixels)
• Ultra high (3,072
×
2,048 pixels)
Note
The number of scanned pixels differs according to the film type and
cropping mode (panorama, slide, etc.).
Manual adjustment of colors and density of pictures is possible
You can manually adjust the density, and colors (for color pictures) or
contrast (for monochrome pictures) of the prescanned image. In addition,
the full correction which adjusts a picture taken under different lighting
conditions from other pictures, and the lower correction which adjusts a
picture composed almost in one color, are possible.
Consult the Software Manual about procedures.
Features
