E-4
9. Open the door of the book receptacle/2, remove
the tapes the Lifter (2 places) and two locking
materials (7 screws ), raise the Lifter up to the
position where it stops, and remove the cushion.
10. Remove the locking tape on the cover tray.
(1) While pushing up the lock lever, pull out the
cover tray.
(2) Remove the locking tapes inside the cover
tray. Then remove the guide tape.
IV.
Installation Procedure for each option
1. Turn the machine’s Sub and Main power switches
OFF, and unplug the power cord.
2. Install the Installation plate 1, the Installation plate
2, the Installation plate 3, and the Installation plate
5 on the left side of the machine as below. (TP
screw M4x6: 8 pcs.)
3. Remove the connector cover on the left side of
the machine (1 screw).
A075IXE007SA
Lifter
Locking materials
Cushion
Tapes
A075IXE008SA
Lock Lever
A075IXE009SA
Guide tape
Locking tapes
Installation procedure for
[PB-501 + 1050 series]
A075IXE010SA
Installation
plate 1
TP screws M4x6
Installation
plate 2
TP screws M4x6
Installation
plate 5
TP screws M4x6
Installation
plate 3
TP screws M4x6
Put screws in the
holes on the right.
15AQIXE014SA
Connector cover
