E-11
4. Install the PB-501 to the SD-501 (SD-506).
(1) Connect the four connector jacks of the PB-501
to the connector plugs on the SD-501 (SD-506).
(2) Align the top hole with the Installation plate 1,
and the bottom hole with the Installation plate
5, and slide them to the back.
(3) Secure the PB-501 onto the Installation plate 2
with a screw. (TP screw M4x10: 1 pc.)
(4) Pull out the cover tray, and install the Installa-
tion plate 4. (TP screw M4x10: 1pc.)
Note:
If the screw holes of the Installation plate 2 and the
Installation plate 4 do not align, adjust them by the
height of the casters on the PB-501.
A075IXE020SB
PB-501
connector jacks
SD-501
PB-501
(SD-506)
A075IXE021SB
Holes
Installation plate 1
PB-501
SD-501
Top
Bottom
Installation plate 5
(SD-506)
A075IXE022SA
Installation plate 2
TP screw M4x10
A075IXE030SA
Installation plate 4
TP screw M4x10
A075IXE014SA
