Konica Minolta PB-501, Installation Manual

Page: 18 / 19

E-18
6. Plug in the power cord.
VI.Serial Number Registration
Register the serial number of the PB-501 that has
been installed to the machine.
The location of the serial number is shown in the fig-
ure below.
[For the 1050 series]
[For the C6500/C6501 series]
A075IXE018SA
Power cord
A075IXE048CA
Step
1. Plug the power cord into the outlet and turn
ON the Main power switch.
2. Enter Service mode.
Note:
Refer to procedures in the Service Manual to
enter into the Service Mode.
3. Touch “System Setting” to display sub menus.
4. Touch “M/C Serial Number Setting” from the
system setting sub menus.
5. Touch the finisher No. key according to the
place where it was installed to display the
Serial number entry screen.
* M PB-501 : Finisher 1
Mother PB-501
: Finisher 2
other o PB-501
: Finisher 3
6. Enter the serial number of the PB-501 and
touch “OK”. (Use “Shift” to switch between
upper case letters and lower case letters.)
7. Touch “OK” on the serial number list screen.
Step
1. Plug the power cord into the outlet and turn
ON the Main power switch.
2. Enter Service mode.
Note:
Refer to procedures in the Service Manual to
enter into the Service Mode.
3. [Service Mode Menu screen]
Touch “System Setting”.
4. [System Setting Menu screen]
Touch “M/C Serial Number Setting”.
5. Touch the finisher No. key according to the
place where it was installed to display the
Serial number entry screen.
* M PB-501
: Finisher 1
Mother PB-501
: Finisher 2
other o PB-501
: Finisher 3
6. Enter the serial number of the PB-501 and
touch “OK”. (Use “Shift” to switch between
upper case letters and lower case letters.)
7. Touch “Return” on the serial number list
screen.