Konica Minolta MAXXUM FLASH 5600HS (D), Instruction Manual, Page: 57 / 80

57
6. Press the select button repeatedly
until blinking stops.
7. Take the photo.
1. Connect the flash units with off-cam-
era cables.
2. Switch all flash units on.
3. Press the mode button on the
5600HS (D) to display on the
data panel.
4. Press the select button repeatedly to
blink [RATIO].
5. Press the + or – button to select
or .
• If is selected, it provides 1/3 of the
whole light intensity. If , it proveds 2/3
of the whole intensity.
• Other flashes will provide the rest of the
light intensity automatically.
CONNECTING BY
CABLE