Konica Minolta MAXXUM FLASH 5600HS (D), Instruction Manual, Page: 52 / 80

52
WIRELESS/REMOTE FLASH MODE
[3]-1 Using Wireless Remote Flash Controller
• The Wireless Remote Flash Controller
and at least one 5600HS (D), 3600HS
(D), 5400HS, 5400xi, or 3500xi is
required.
• Use Maxxum/Dynax 9, 7, 800si, 700si,
or 600si.
The Wireless Remote Flash Controller manual may state that it is
for use only with the Maxxum/Dynax 9xi. However, it may be used
with all the cameras listed above. As test flash differs between cam-
eras, refer to the camera manual beforehand.
It may state that only the 5400xi and 3500xi flash units can be
used, however the 5600HS (D) can be used in the same way as the
5400xi.
The 5600HS (D) is set up with the wireless flash as shown below.
1. Switch the 5600HS (D) on.
2. Press the mode button to display
or .
+ button
– button
Select button
Mode button