Konica Minolta MAXXUM FLASH 5600HS (D), Instruction Manual, Page: 56 / 80

56
CONNECTING CAMERA AND FLASH BY CABLE
Flash-Ratio Control (varying the intensity of individual flash)
When using two or more flash units, it
is possible to provide a flash intensity
of 1 and 2 (or 2 and 1) respectively.
• Ratio control is not possible with B
group flash units only (p. 55).
• Ratio control cannot be used with
300si, as proper exposure may not be
obtained.
Set up the A group flash with ratio control. The following applies
when the 5600HS (D) is used. See each flash manual for other
flashes.
+ button
– button
Select button
Mode button
Equalizing The Power Level Of All Flash Units
All the flash units in A and B group can be used.
1. Connect the flash units with off-camera cables.
2. Switch all flash units on.
3. Take the photo.