Konica Minolta MAXXUM FLASH 5600HS (D), Instruction Manual, Page: 53 / 80

1. Set up the 5600HS (D) with the off-camera flash as
described in 1~4 on page 52~53.
53
3. Press the select button repeatedly to
blink [WL].
4. Press the + or – button to blink [WL
On].
5. Press the select button repeatedly
until blinking stops.
Taking Photos
Refer to the Wireless Remote Flash Controller manual.
• Set shutter speed to 1/60 of a second or less (low shutter speed).
Wireless high-speed sync photography cannot be used.
[3]-2 Ratio-Flash Control Using Two Or More Flash Units
When using wireless flash with two or more program flash units, it
is also possible to provide a flash intensity of 1 and 2 (or 2 and 1)
respectively.
• Ratio-flash control is not possible with 3600HS (D) and 3500xi only, as
ratio cannot be set with these flashes. Use with 5600HS (D), 5400HS,
or 5400xi.
• Ratio-flash control cannot be used with manual flash photography
.
Continued on next page
Using 5600HS (D), 5400HS, 5400xi only
(The following applies for 5600HS (D). See flash or Wireless
Remote Flash Controller manual for other flashes.)
WIRELESS FLASH