
17
4. Press the shutter-release but-
ton partway down and check
that the subject is within the
flash range.
• See page 18 for details of the flash
range.
5. When the flash is charged,
press the shutter-release but-
ton to take the photo.
• The flash is charged when
indica-
tors on the rear of the unit and in the
camera viewfinder are both lit.
When the correct exposure has been
obtained for the photo just taken:
•
is displayed in the data panel for
approximately four seconds.
• The
indicator blinks in the camera
viewfinder.
• The photo will be under-exposed if taken before charging is complete.
• When a photo is taken immediately after charging is complete while
using slide film, it may be under-exposed near the farther limit of the
flash range (p. 18).
• Press the shutter-release button after checking that charging is com-
plete when using the flash with the self-timer.
Continued on next page
P
MODE FLASH
Summary of Contents for MAXXUM FLASH 5600HS (D)
Page 1: ...PROGRAM FLASH MAXXUM FLASH 5600HS D E INSTRUCTION MANUAL...
Page 68: ...68 APPENDIX...
Page 78: ...78 MEMO...
Page 79: ...79...