manualshive.com logo in svg

Konica Minolta magicolor 2400W, User Manual

Share
Download
Konica Minolta magicolor 2400W User Manual Download Page 71

Clearing Media Misfeeds 

65

Clearing Media Misfeeds 

To avoid damage, always remove misfed media gently, without tearing it. Any 
pieces of media left in the printer, whether large or small, can obstruct the 
media path and cause further misfeeds. Do not reload media that has misfed.

Note

The image is not fixed on the media before the fusing process. If you 
touch the printed surface, the toner may stick to your hands, so be 
careful not to touch the print face when removing the misfed media. 
Make sure not to spill any toner inside the printer. 

CAUTION

Unfused toner can dirty your hands, clothes, or anything else it gets on.

 

If you accidentally get toner on your clothes, lightly dust them off as 
best as you can. If some toner remains on your clothes, use cool, not 
hot water, to rinse the toner off. If toner gets on your skin, wash it off 
with cool water and a mild soap.

CAUTION

If you get toner in your eyes, wash it out immediately with cool water 
and consult a doctor.

If, after clearing the media misfeed, the misfeed message in the control panel 
window persists, open and close the printer’s covers. This should clear the 
misfeed message. 

Summary of Contents for magicolor 2400W

































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands