Section 4 Scan Mode - Monochrome
4-15
2.7.3 Stamp
Select “Stamp” to display another sub screen. This will allow the selection of a “Stamp” or
“Water Mark” to be placed on the scanned image. It will be embedded digitally into the
image.
a) Use the Arrow buttons to scroll
through the available stamps and
then select the stamp from the list.
b) The Stamp button will now display the stamp
selected.
NOTE
The list of “Stamps” is loaded into Scan Mode by the system administrator or key
operator. They can not be altered or modified in any manner on the KIP printer’s
UI.
Please contact these persons for any additional stamps that may be required.
Please see “KIP Request” for these functions.
