Konica Minolta FS-501 Service Manual Download Page 3

Page: 3 / 70

After publication of this service manual, the parts and mechanism may be subject to change for
improvement of their performance.
Therefore, the descriptions given in this service manual may not coincide with the actual machine.

When any change has been made to the descriptions in the service manual, a revised version will be
issued with a revision mark added as required.

Revision mark:

• To indicate clearly a section revised, show

to the left of the revised section.

A number within

represents the number of times the revision has been made.

• To indicate clearly a section revised, show

in the lower outside section of the correspond-

ing page.
A number within

represents the number of times the revision has been made.

NOTE

Revision marks shown in a page are restricted only to the latest ones with the old ones deleted.

• When a page revised in Ver. 2.0 has been changed in Ver. 3.0:

The revision marks for Ver. 3.0 only are shown with those for Ver. 2.0 deleted.

• When a page revised in Ver. 2.0 has not been changed in Ver. 3.0:

The revision marks for Ver. 2.0 are left as they are.

2004/09

2.0

Adding the descriptions and correcting errors in
writing

2004/03

1.0

—

Issue of the first edition

Date

Service manual Ver.

Revision mark

Descriptions of revision

Summary of Contents for FS-501







































































Search results

Summary of Contents for FS-501

Reviews:

Related manuals for FS-501

Brands by name

Popular brands

Konica Minolta FS-501, Service Manual

Search results

Summary of Contents for FS-501

Reviews:

Related manuals for FS-501

Brands by name

Popular brands