Konica Minolta CM-3600A, Instruction Manual

Page: 16 / 40

14
WARNING
Always use the AC adapter supplied as a standard accessory or specified replacement AC
adapter with the CM- 3600A, and connect it to an AC outlet of the rated voltage and frequency.
Failure to do so may damage the CM3600A or the AC adapter, causing a fire or electric shock.
If the CM-3600A will not be used for a long time, disconnect the AC
adapter from the AC outlet. Accumulated dirt or water on the prongs of the
AC adapter's plug may cause a fire and should be removed.
Do not insert or disconnect the AC adapter with wet hands. Doing so may cause electric shock.
Insert the power plug fully and securely. Incomplete inserting may cause fire or electric shock.
Do not disassemble or modify the AC adapter. Doing so may cause a fire or electric shock.
Do not unplug or plug in the AC adapter with the instrument’s power
switch set to ON. Doing so may cause malfunction.
Connecting the AC Adapter
1.
Make sure that the power switches of both
CM-3600A and host PC are set to OFF ("

").
2.
Insert the output plug of the AC
adapter into the AC adapter input
socket on the rear of the CM-3600A.
3.
Insert the input plug of the AC
adapter into an AC wall outlet.
○
The AC Adapter AC-A308 supplied as
the standard accessory must be used.
○
Before disconnecting the AC adapter, the
power switch must be set to OFF ("

").