Konica Minolta CA-100PLUS, Instruction Manual

Page: 22 / 125

20
3
Analog display section ............................ Displays the difference (%) between the measured value and the tar-
get color or the difference (%) between measured values.
The range for each dot can be set between 0.1 and 99%. (Page 68)
The range has been set to 10% prior to factory ship-
ment.
●
When xylv, T ∆ uvLv, u'v'Lv or XYZ measurement
mode is selected
∆ x, ∆ y and ∆ Lv are displayed.
●
When an analyzer measurement mode is selected
For G-reference R/G, B/G and
∆ G are displayed.
For R-reference ∆ R, B/R and G/R are displayed.
4
LCD display section ................................ Displays the memory channel, probe no., ID name, warning and set-
tings.
In case of error, an error message will appear.
(For a description of what to do in case of error, refer to page 107.)
+n × 8% or
higher
Red Green Red
-n × 8%
or lower
Below
±
n%
Below
±
n
×
2%
Below ± n × 4%
Below ± n × 8%
CH00 EXT Ad P1H
[MINOLTA ]
Displays the currently selected SYNC mode. (NTSC,
PAL, EXT, UNIV, INT) (Page 38)
Displays the currently selected measurement speed.
(A.F.S) (Page 36)
Displays the calibration mode for the currently se-
lected memory channel. (d.a.m) (Page 56)
Probe no. (Page 43)
H will be displayed for High Luminance Measuring
Probe(CA-PH02/05). For Measuring Probe(CA-P02/
05) nothing will be displayed.
ID name display area (Page 66)
Memory channel
(Page 48)