Safety Symbols
The following symbols are used in this manual to prevent accidents which may occur as result of incorrect
use of the instrument.
Denotes a sentence regarding safety warning or note.
Read the sentence carefully to ensure safe and correct use.
Denotes a sentence regarding safety precautions for risk of fire.
Read the sentence carefully to ensure safe and correct use.
Denotes a sentence regarding safety precautions for risk of electric shock.
Read the sentence carefully to ensure safe and correct use.
Denotes a prohibited operation.
The operation must never been performed.
Denotes an instruction.
The instruction must be strictly adhered to.
Denotes an instruction.
Disconnect the AC power cord from the AC outlet.
Denotes a prohibited operation.
The part must never be disassembled.
Denotes an instruction.
Connect the grounding terminal as instructed.
SIP/SOP Connections
•
Accessories equipment connected the analog and digital interfaces must be certified to the respective
IEC standards (i.e. IEC 60950 for data processing equipment).
•
Furthermore all configurations shall comply with the system standard IEC 61010-1. Everybody who
connects additional equipment to the signal input part or signal output part configures a electrical equip-
ment for measurement system, and is therefore, responsible that the system complies with the require-
ments of the system standard (IEC 61010-1. If in doubt, consult the technical services department or your
local representative).
Notes on this Manual
•
Copying or reproduction of all or any part of the contents of this manual without KONICA MlNOLTA’s
permission is strictly prohibited.
•
The contents of this manual are subject to change without prior notice.
•
Every effort has been made in the preparation of this manual to ensure the accuracy of its contents.
However, should you have any questions or find any errors, please contact a Konica Minolta authorized
service facility.
•
KONICA MINOLTA will not accept any responsibility for consequences arising from the use of the
instrument.
Summary of Contents for CA-100PLUS
