manualshive.com logo in svg

Konica Minolta BIZHUB C30P, User Manual

Share
Download
Konica Minolta BIZHUB C30P User Manual Download Page 220

Solving Other Problems

206

You are 
experienc-
ing duplex 
(Double-
Sided) prob-
lems.

Media or settings are 
not correct.

For autoduplexing, make sure that you 
have a duplex option installed.
Make sure that you are using correct 
media. 

„

See “Media Specifications” on page 
98. 

„

Do not duplex (Double-Sided) enve-
lopes, labels, postcards, thick stock, 
glossy, or transparencies. 

„

Make sure that you have not mixed 
media types in Tray 1.

Make sure that your document has 
more than one page.
Make sure the duplex option is installed 
and declared in the Windows printer 
driver (Properties/Configure tab).
In the Windows printer driver (Layout/
Double-Sided), choose “Dou-
ble-Sided.”
For N-up on duplexed pages, choose 
Collate only in the Windows driver’s 
Paper Tab. Do not set collation in the 
application.

With

 

N-up on 

multiple cop-
ies, the out-
put is 
incorrect.

Both the driver and 
the application have 
been set for collation.

For N-up on multiple copies, choose 
Collate only in the Windows driver’s 
Paper Tab. Do not set collation in the 
application.

You hear 
unusual 
noises.

The printer is not 
level.

Place the printer on a flat, hard, level 
surface.

The tray is not 
installed correctly.

Remove the tray that you are printing 
from and reinsert it completely into the 
printer.

There is a foreign 
object stuck inside 
the printer.

Turn off the printer and remove the 
object. If you cannot remove it, contact 
Technical Support. 

Symptom

Cause

Solution

Summary of Contents for BIZHUB C30P





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands