manualshive.com logo in svg

Konica Minolta BIZHUB C30P, User Manual

Share
Download
Konica Minolta BIZHUB C30P User Manual Download Page 188

Cleaning the Printer

174

Cleaning the Laser Lens

This printer is constructed with four laser lenses. Clean all lenses as 
described below. The laser lens cleaning tool should be attached to the inside 
of the front cover.

1

Open the printer’s front cover 
and remove the cleaning tool 
from the machine’s front cover.

2

Insert the laser lens cleaning 
tool into the laser lens cleaning 
opening, pull it out, and then 
repeat this back and forth move-
ment 2 or 3 times.

3

Clean between each of the laser 
lenses in the same way.

"

The laser lens cleaning tool 
is included with the printer.
Safely store the laser lens 
cleaning tool so that it will not 
be lost.

4

Return the laser lens cleaning tool to its holder on the inside of the front 
cover.

5

Close the front cover.

Summary of Contents for BIZHUB C30P





















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands